Black Command - MA lighting dot2 User Manual

8.7. Black Command

This page describes the syntax and how to use the
Black
To go to the command press and hold the
Description
With the black command you set the dimmer attribute of an executor to 0 %
temporary, as long as you press and hold the executor
with a command
Syntax
To set the dimmer attribute of an executor to 0 %.
Black
Example 1
Let´s assume you will temporary set the dimmer attribute of executor 3 to 0 % as long as you press and hold the
executor.
Press and hold and <<<
As long as you hold the executor button, the black command will be executed.
As soon as you leave the executor button, the executor is back in its normal status.
Example 2
Let´s assume you will set the dimmer attributes of executor 3 to 0 %, by a command.
Press and hold and <<<
The dimmer values are set to 0 %.
To bring a button executor back in its normal status, press the button executor twice.
To bring a fader executor back in its normal status, move the fader to 0 % and up again.
Related Links
MA Key
<<< [GoFastBack] Key
Change Functions of Executor Buttons
Select Functions of Executor Buttons
8.8. Blind Command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Black
command.
key and the
[GoFastBack] (=Black) and press and hold the respective executor button
[GoFastBack] (=Black) Exec 3 Please
<<< [GoFastBack] key on the console.
.
.
384