MA lighting dot2 User Manual page 189

d o t 2 U s e r Ma n u a l
Preset Type Attributes
In the preset type bar you can find options to the following attributes, depending on your patched fixtures.
Dimmer:
Tap to change the dimmer attributes, e.g. dim, curve, master intensity.
Position:
Tap to change position attributes, e.g. pan and tilt.
Gobo:
Tap to change gobo attributes, e.g. gobo wheels and clips.
Color:
Tap to change the color attributes, e.g. color, mix color, HSBC. In this view you can go to the dialogs picker, fader
and swatchbook.
Beam:
Tap to change beam attributes, e.g. shutter, iris and frost.
Focus:
Tap to change focus attributes, e.g. focus and zoom.
Control:
Tap to change control attributes, e.g. lamp control, fixture global and scan rate.
Shapers:
Tap to change shaper attributes, e.g. frames, barndors and position.
Video:
Tap to change video attributes, e.g. keystone, video effects and video scale.
7.1.5. Title Bar
Every view has a title bar with information in which view you are and different icons.
Figure 1: Normal Title Bar
All changes you are do in a gray title bar mode interact directly with the console.
There are different title bar icons, depending on the view.
Symbol View
: Located in the fixtures view title bar.
Tap to switch to the symbol view.
Sheet View
: Located in the fixtures view title bar.
Tap to switch to the sheet view.
189
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com