Cue Command - MA lighting dot2 User Manual

8.12. Cue Command

This page describes the syntax and how to use the cue command.
To go to the cue command press
Description
With the cue command you can e.g.
select all fixtures of a cue in the fixtures view
copy a cue
go to a cue
Syntax
1. Select the fixtures of a cue.
Cue 1
2. Copy a cue.
Copy Cue 2 At 9
3. Go to a cue.
Goto Cue 3 Executor 5
Example 1
Let´s assume you will select all fixtures of cue 1 from the executor 1.
Cue 1 Exec 1 Please
All fixtures from cue 1, executor 1 are selected.
Example 2
Let´s assume you will select all fixtures of cue 1 from the main executor.
Cue 1 Please
All fixtures types from cue 1, main executor are selected.
Example 3
Let´s assume, you will copy cue 2 at cue 9.
Press Copy 2 (=Cue 2)
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Cue on the console.
At 9 Please .
391