Off Command - MA lighting dot2 User Manual

The main executor is moved to executor 6 on page 1.

8.40. Off Command

This page describes the syntax and how to use the off command.
To go to the off command, press
Description
With the off command you can
turn an executor off
turn an executor with fade time off
turn off all normal executors assigned with a cue list
remove selected fixtures from the
Syntax
1. Turn off the main executor.
Off
2. Turn off an executor with fade time.
Off Executor 1 Fade 2
3. Turn off all normal executors with a cue list.
Off Thru
4. Remove fixtures along with their values from the programmer in the fixtures view.
Off Fixture 3
Example 1
Let´s assume, you will turn executor 1 off.
There are three ways to do this.
a) Press Off , and the respective executor button
b) Press Off Exec 1 Please
c) Press Off , and tap the respective executor button in the
Executor 1 is off.
Example 2
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Off on the console.
fixtures view
.
.
executor bar view.
428