MA lighting dot2 User Manual page 421

Control console

Hide thumbs Also See for dot2:

Table of Contents

To go to the label command, press

With the label command, you can label e.g.

fixtures in the

fixtures sheet view

groups in the

presets in the

presets pool

1. Label a fixture.

Label Fixture 1

2. Label a group.

Label Group 1

3. Label a preset.

Label Preset

Let´s assume, you will label the fixtures 1 thru 10 as Mac700 with a consecutive number at the end, in the fixtures

There are two ways to to this.

Label Fixture 1 Thru 10 Please

and select the fixtures 1 thru 10 in the fixtures view.

Enter Name for Window

Enter "Mac700 1".

Fixture 1 Thru 10 are labeled as Mac700 with a consecutive number at the end, in the fixtures sheet view.

Let´s assume, you will label group 1 as "All Studio Colors" in the groups pool.

There are two ways to to this.

Label Group 1 Please

and tap at group 1 in the groups pool.

Enter Name for Window

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

on the console.