MA lighting dot2 User Manual page 248

d o t 2 U s e r Ma n u a l
Figure 16: Shutter effect
Strobe
(object number 19):
Changes between fast and slow strobe.
Figure 17: Strobe effect
Focus Effects
In the dot2 are two predefined focus effects available.
Zoom
(object number 20):
Changes between wide and narrow.
Focus
(object number 21):
Changes between minimum and maximum focus.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key . The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the key and press the encoder key . The
encoder speed equals one DMX step.
Figure 18: Effect encoder bar
To use the second function of an encoder, press and hold the key.
To open the calculator, press the encoder.
For detailed information about the settings, refer to What are Effects?.
High Value or Low Value:
To select the high or low value, turn the encoder left or right.
Speed:
To select the speed in BPM (beats per minute), turn the encoder left or right.
Phase:
To select the phase, turn the encoder left or right.
248
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com