MA lighting dot2 User Manual page 306

d o t 2 U s e r Ma n u a l
Figure 3: Patch and Fixture Schedule buttons
Add New Fixture Window:
Tap to open the Add New Fixtures Window.
Create Multipatch:
Tap to open the Calculator. Enter the amount of multipatch fixtures.
Multipatch create additional row to patch several DMX addresses for the selected fixture in the Patch and Fixture
Schedule. It is used to control several DMX addresses by using one fixture ID in the console. The multipatch fixtures
are doing all the same, indicated by the same fixture ID. The multipatched fixtures are visualized in the dot2 3D. For
more information, see dot2 3D - 3D objects.
Change Fixture Type:
Tap to change the selected fixture type. The Select Fixture Type... Window opens.
Unpatch Selected:
Tap to unpatch the selected fixtures.
Delete Selected:
Tap to delete the selected fixture from the Patch & Fixture Schedule.
Encoder Bar Functions
Figure 4: Encoder Bar Functions - Patch and Fixtures Schedule
Scroll:
To scroll up or down, turn the encoder left or right.
306
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com