Temp Command - MA lighting dot2 User Manual

How to work with Effects?
MA Key

8.62. Temp Command

This page describes the syntax and how to use the Temp command.
To go to the Temp command, press and hold the
Description
With the Temp command you can temporary turn an executor on, as long as you hold the executor button.
The Temp command follows the cue timing, off timing and the position of the executor fader.
If you keep the hands off from the executor button, the executor is off again. The Temp Off command will be
executed.
Syntax
Turn the executor temporary on.
Temp Executor 1
Example
Let´s assume you will temporary turn the executor 1 on, until you keep the hands off.
Press + Toggle (=Temp) and the respective executor button
The executor is on as long as you hold the key.
Related Links
MA Key
Toggle Key
Executor Bar View
8.63. Thru Command
This page describes the syntax and how to use the thru command.
To go to the Thru command, press
Description
With the Thru command you can
select all fixtures in the fixtures view
select the range of fixtures in the fixtures view
delete cues and all following cues, from the main executor
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
and Toggle
Thru on the console.
on the console.
.
459