MA lighting dot2 User Manual page 326

d o t 2 U s e r Ma n u a l
Select Fixture Type... Window,
To leave the tap .
For more information about add and patch fixtures, see how to add and patch fixtures?
Symbol View
To go to the symbol view, tap the symbol view icon in the title bar.
The fixture types are fielded in tiles.
A selected fixture type has a white frame around the tile.
The number in the upper left corner of the tile, displays the fixture type number in the current show file.
In bold white font is the fixture type displayed.
Below the fixture type is the manufacturer displayed.
Sheet View
sheet view icon
To go to the sheet view, tap the in the title bar.
Figure 2: Select Fixture Type... Window - Sheet View
The table has nine columns with information to the fixture type.
Cells with a bright gray background are editable.
Cells with a dark gray background are read only.
1. No
Displays the fixture type number in the current show file.
2. LongName
Displays the name of the complete fixture type.
Edit LongName Window.
To edit the long name, press and hold the cell. It opens the
3. ShortName
Displays the abbreviation of the long name from the fixture type.
Edit Short Name Window
To edit the short name, press and hold the cell. It opens the .
4. Manufacturer
Displays the manufacturer of the fixture type.
Edit Manufacturer Window.
To edit the manufacturer, press and hold the cell. It opens the
326
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com