MA lighting dot2 User Manual page 381

Control console

Hide thumbs Also See for dot2:

Table of Contents

command, you can

apply values to selected fixtures

apply presets to selected fixtures

apply a value from a fixture to another fixture

apply a value to an executor

use it as a helping command for e.g. a copy function

1. Apply values to the selected fixtures:

2. Apply presets to selected fixtures:

At Preset 1.2

3. Apply a value from a fixture to another fixture:

Fixture 1 At Fixture 2

4. Apply a value to an executor.

Executor 1 At 50

command as a helping command for a e.g. a copy function.

Copy Cue 2 At 3

Let´s assume, you will apply the dimmer value to 50 % to the selected fixtures.

At 5 0 Please

All selected fixtures have the dimmer value 50.

Double check the dimmer value in the

If the master fader is not set to 100 %, the values in the Fixture Symbol View are smaller than in the

Fixture Sheet View.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

Fixtures Sheet