MA lighting dot2 User Manual page 190

d o t 2 U s e r Ma n u a l
Layout View:
Located in the fixtures view title bar.
Tap to switch to the layout view.
Pin:
Located in the title bar from the fixture view, presets view, cues view and DMX view.
Tap to pin your view and deactivate the dynamic view mode.
Tool
: Located in the cues and executor bar window title bar.
Tap to go to the cue settings.
Trash Can
: Located in the load show window title bar.
Tap to delete a show.
View
: Located in the DMX view title bar.
Tap to get the full view with attributes or remove the full view.
Minimize
: Located in the executor bar window title bar.
Tap to minimize the executor bar window to the executor bar.
If you see this icon, you can also close the view by swiping from the top of the screen to the bottom.
Jump Back
: Located in the select fixture ID(s) view title bar.
Tap to jump backwards to the next available fixture ID.
Jump Forwards
: Located in the select fixture ID(s) view title bar.
Tap to jump forwards to the next available fixture ID..
Effect Loop:
Located in the preset type views title bar.
Tap to open the corresponding effect view.
Information Sign:
Located in the Setup.
Tap to open the System Information Window.
Backup Icon:
Located in the Load Show Window.
Tap to see the .backup files.
Esc
: Located on the left side of a title bar.
190
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com