MA lighting dot2 User Manual page 305

d o t 2 U s e r Ma n u a l
Fixture Type:
Displays the fixture type inclusive the fixture type number at the beginning and the mode.
This column has a sort function.
To edit the fixture type, tap at Change Fixture Type , or press and hold the cell, or press the scroll encoder. The
Select Fixture Type... Window opens.
Patch:
Displays the patch address (DMX address). If a fixture has no patch it is displayed as a dash in brackets.
To edit the patch address, press and hold the cell or press the scroll encoder. The Select DMX Address... Window
opens.
Pan DMX Invert:
Displays if pan DMX invert is on or off (= nothing is displayed).
To change the status, press and hold the cell or press the scroll encoder.
Tilt DMX Invert:
Displays if tilt DMX invert is on or off (= nothing is displayed).
To change the status, press and hold the cell or press the scroll encoder.
Pan Enc. (=Encoder) Invert:
Display if pan encoder invert is on or off (= nothing is displayed).
To change the status, press and hold the cell or press the scroll encoder.
Tilt Enc. Invert:
Display if tilt encoder invert is on or off (= nothing is displayed).
To change the status, press and hold the cell or press the scroll encoder.
Visualization Color:
The visualization color, helps to display the actual color of the light in the dot2 3D or the Fixtures View, e.g. for
dimmer using a gel.
To change the visualization color, press and hold the cell or press the scroll encoder. The Edit Visualization color
window opens.
The Edit Visualization window is basically the same as the Color Preset Type view.
Buttons in the Schedule
Rightmost of the window are five buttons.
305
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com