Park Command - MA lighting dot2 User Manual

Control console

Hide thumbs Also See for dot2:

Table of Contents

and tap on page 1 in the

All executors stored on page 1 are deleted.

Let´s assume, you will create a new page 3.

There are two ways to do this:

Store Page 3 Please

until you reach page 3.

Page 3 is created.

Let´s assume, you will label page 2 as effects.

There are two ways to do this:

Label Page 2 Please

and tap on page 2 in the

Enter Name for Window

8.45. Park Command

This page describes the syntax and how to use the Park command.

To go to the Park command, press and hold

Park is in the

With the Park command, you can park

the current value of a fixture

a specific value of a fixture

the values of a preset type from a fixture selection

a specific DMX channel

Parked DMX channels are displayed with a blue background in the

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

(=Park) on the console.