MA lighting dot2 User Manual page 382

Control console

Hide thumbs Also See for dot2:

Table of Contents

Let´s assume, you will apply a dimmer preset object to all selected fixtures.

1. Go to the

2. Tap a dimmer preset object.

At Preset 1 . 2 Please

All selected fixtures have the selected dimmer preset objects.

Let´s assume, you will apply the values from fixture 1 to fixture 2.

Select at first the fixture which should get the value and then the fixture where the value comes from.

1. Select the fixture which should get the value

2. Select the fixture where the value comes from.

At Fixture 1 Please

Fixture 2 has the value from fixture 1.

Let´s assume, you will apply the executor 3 to the value 50 %.

The physical fader doesn´t move.

To apply the value to the main executor, do not type in an executor number, just

Exec 3 At 5 0 Please

The executor 3 has now 50 %.

Let´s assume you will copy the Cue 2 to the Cue 3.

You need the

command as a helping command.

Copy Cue 2 At 3 Please

The system asks you to choose the copy method.