MA lighting dot2 User Manual page 487

d o t 2 U s e r Ma n u a l
Programmer:
Is a container with the current selection of fixtures and values of manual adjusted attributes. Those values are red
values. Refer to, Value colors.
Program Time Master:
The program time master controls the fade times of all program values and effects, between 0 and 10 seconds.
This affects both, the adding of new values into the programmer, and the removing of values from the programmer
with the Clear key.
The program time master is a fade executor. Refer to, Empty Executor Window.
R
Rpm
(revolution per minute):
Rotationspeed of a gobowheel in the unit revolution per minute, refer to Gobo Preset Type View.
S
Shutter:
Fast open and close of the light output of a fixture type.
SMPTE
(society of motion picture and television engineers):
Is a timecode to synchronize different devices from different manufacturers in the audio and video technology. Refer
to, Select Trig View.
Snap:
A lot of fixture types with gobo and color wheels have snap channels.
That means those attributes will be directly executed disregarding the cue fade time.
Snap Percent:
Is a setting after how much percent of the fade time the attribute will be executed.
The default value for snap channels is 0 %. Refer to, Cues View.
Special Master:
Is an executor with a special function, e.g. Program Time Master or Master Rate.
Strobe:
Repeating fast open and close of the light output of a fixture.
T
Tilt:
Vertical movement axis of an fixture. Refer, to Position Preset View.
Trig
(Trigger):
Call of a cue.
U
Universe:
Refer to, DMX universe.
487
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com