Update Command - MA lighting dot2 User Manual

Control console

Hide thumbs Also See for dot2:

Table of Contents

DMX channel 1.34 is unparked.

Let´s assume you will unpark the previous parked dimmer attributes of the current fixture selection.

There are two ways to do this:

a) Press and hold

b) Press and hold

The previous parked dimmer attributes of the current fixture selection is unparked.

8.67. Update Command

This page describes the syntax and how to use the update command.

To go the update command, press

With the update command, you can update

Let´s assume, you edited a group 1 by using the

An indicator that the update function is available is the flashing

Update Please

The console asks, if you want to update Group 1. Tap Ok .

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

(=Unpark) and tap Dimmer in the

on the console.

command, and now you will apply the changes to group 1.

and enter in the command line the word

key on the console.