Dmx Command - MA lighting dot2 User Manual

The connection from the preset to the cue will be lost and the values from the preset will be directly stored in the
cues.
Example 4
Let´s assume, you will unpatch fixture 1 from the DMX universe.
Press Delete and tap on fixture 1 in the fixtures view.
The console asks to confirm the unpatch process.
Tap OK .
Fixture 1 is unpatched.
Double check the patched fixtures in the

8.16. Dmx Command

This page describes the syntax and how to use the Dmx command.
To go to the Dmx command, press
Dmx is in the command line.
Description
With the Dmx command you can:
Make a DMX test.
Turn off the DMX tester.
Select a fixture on a DMX address.
Patch fixture to a DMX address.
Unpatch fixtures from a DMX address.
Syntax
1. Make a DMX test.
DMX 1.7 At 100
2. Turn off the DMX tester.
Off DMX Thru
3. Select a fixture on a DMX address.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Patch and Fixture
DMX on the console.
Schedule.
396