MA lighting dot2 User Manual page 397

DMX 2.2
4. Patch fixtures to a DMX address.
Assign Fixture 1 At DMX 2.1
5. Unpatch fixtures from a DMX address.
Delete DMX 1.7
Example 1
Important:
If the DMX tester is on, all parked values and values from the programmer will be blocked by the dmx test
value.
To turn off the DMX tester, refer to example 2 or open the
Let´s assume you will make a DMX test with the DMX address 1.7 and set the DMX value at 100 %.
Press DMX 1 . 7 At 1 0 0 Please
The DMX value is 254 and is displayed with a red background in the
Example 2
Let´s assume you will turn off all DMX tester values by using the DMX command.
Press Off DMX Thru Please
All DMX tester values are off.
Hint:
You can also use the
Example 3
Let´s assume, you will figure out which fixture is patched at DMX address 2.2.
Press DMX 2 . 2 Please
The fixture patched at DMX address 2.2 is selected.
Hint:
If you are looking for a fixture patched at universe 1, just press
necessary for universe 1.
Example 4
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
.
.
tools window to turn off the DMX tester.
.
tools window.
DMX View.
DMX 2 Please . The universe is not
397