MA lighting dot2 User Manual page 93

This is the final result:
Cue Fixture 1
number Dim
100
1
0
2
100
3
0
4
0
5
100
6
This is the principle behind Tracking Shield:
The system looks for dimmer values that changes from 0 to above 0 for each single fixture. If there's a change in the
dimmer (from 0 to a value above), then it stores the tracked values before creating the new values in the previous
cues, thus preventing the cue output from changing because of the tracking.
The dimmer value in cue 5 is a tracked value even though we store both 4 and 5 as Cue Only because of a function
AutoUnblock
called . It's the same mechanism that made the dimmer in cue 6 a tracked value after we stored cue
3. AutoUnblock will automatically remove unnecessary stored values after each store operation.
4.6. What are cues
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Fixture 1
Position
Singer
Singer
Drummer
Drummer
Drummer
Singer
93