MA lighting dot2 User Manual page 430

Syntax
1. Turn on an executor.
On
2. Turn on an executor with fade time.
On Executor 1 Fade 2
3. Turn on all normal executors with a cue list.
On Thru
4. Activate all values of a fixture in the programmer.
On Fixture 1
5. Active all values from a preset type for the selected fixtures in the programmer.
On PresetType 1
Example 1
Let´s assume, you will turn on executor 1.
There are three ways to do this.
a) Press On , and the respective executor button
b) Press On Exec 1 Please
c) Press On , and tap the respective executor button in the
Executor 1 is on.
Example 2
Let´s assume, you will turn on executor 1 with a fade time of 2 seconds.
Press On Exec 1 Time
Executor 1 will go on with a fade time of 2 seconds.
Example 3
Let´s assume, you will turn on all normal executors with a cue list on the current page.
Press On Thru Please .
All normal executors with a cue list on the current page are turned on.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
.
.
(=Fade) 2 Please .
executor bar view.
430