MA lighting dot2 User Manual page 289

7.40. MIDI Configuration
Important:
The MIDI Configuration window is only available with a dot2 onPC. On a dot2 console is this
configuration not necessary.
MIDI Configuration window
To go to the
Figure 1: MIDI Configuration Window
In the MIDI Configuration window you select the MIDI In and MIDI Out source.
To open the drop-down with the available sources, tap at the
Figure 2: MIDI In drop-down
If a valid is source is selected, the red prohibition sign changes into a green tick mark.
Encoder Bar Functions
Figure 3: Encoder Bar - MIDI Configuration Window
Scroll:
To scroll in the selected drop-down up or down, turn the encoder left or right.
7.41. MIDI Monitor Window
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
, press Tools and tap at MIDI Configuration .
three dots
.
289