MA lighting dot2 User Manual page 232
Control console
Hide thumbs
Also See for dot2:
- User manual (614 pages) ,
- Quick manual (67 pages) ,
- Getting started manual (3 pages)
Table of Contents
Advertisement
Information:
Every store, update, or copy function makes an automatically unblock for the cue list. The values being
identical with the value of the previous cue will not be stored again in the cue list. This provides a clean
tracking list. For more information, refer to
If an off time is set for this executor, it is displayed in the title bar.
To change the off time, tap at Off Time in the title bar. The
To start a timecode record for the executor, tap at TC Record (= timecode) in the title bar. The
flashing in the title bar of the cues view and in the
turned on in the
timecode configuration
showed grayed out and the timecode trigger icon is displayed in red.
Figure 2: Cues View - No timecode source is turned on in the Timecode Configuration Window
To open the executor settings, tap the
To pin the view and deactivate the dynamic view mode, tap on the
Below the title bar is the cue table. In this table you can edit the
Number. The
edit cue number(s) window
Cue Name
Protected
Trig (Trigger). The
select trig window
Trigger Time
Fade
Delay
Out Fade
Out Delay
Preset Type Timings
Cmd (Command)
Snap Percent
To edit the cells of the cue table, press and hold the cell. The corresponding edit window opens.
A selected cell in the cue table has blue background with a white frame around.
The current executed cue in the cue table has a green background.
The blue bar in the name column of a running cue displays the fade time from 0% to 100%.
For more information about cues, refer to
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
What is
Tracking?.
settings of executor window
executor
bar. Only available if at least one timecode source is
window. If no timecode source is turned on, the TC Record button is
tool
in the title bar. It opens the
opens.
opens.
What is a Cue?
and
How to work with
opens.
settings of executor
pin
in the
title
bar.
Cues?.
record icon
is
window.
232
Advertisement
Table of Contents
