MA lighting dot2 User Manual page 218

Control console

Hide thumbs Also See for dot2:

Table of Contents

2. Tap Merge .

Figure 4: Values of cue 1 after store merge

The current programmer values are added to the existing cue 1.

Let´s assume, you will remove fixture ID 2 from the existing cue 1 on the main executor.

Figure 5: Values of cue 1 before store remove

1. Select fixture ID 2 in the

2. Double press

4. Tap Remove .

Figure 6: Values of cue 1 after store remove

The fixture ID 2 is removed from the existing cue 1 on the main executor.

Let´s assume, you will overwrite the cue 1 on the main executor with the current programmer values.

and tap on the main executor in the

2. Tap Overwrite .

Cue 1 on the main executor has now the current programmer values. All previous values from the existing cue are

Create Second Cue

Let´s assume, you will create a cue list on the main executor.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

. All values from fixture 2 are in the programmer.

and tap on the main executor in the

executor bar

executor bar