MA lighting dot2 User Manual page 188

System Colors - Executor Bar
What are Cues?
7.1.4. Preset Type Bar
The preset type bar is located at the right side of screen 1.
Figure 1: Preset Type Bar
If no fixture is patched, there is no preset type bar displayed.
Gray font in the preset type bar displays, that this preset type is not available for the current selected fixture.
White font in the preset type bar displays, that this preset type is available for the current selected fixture.
To go to a preset type view: Tap the preset type in the preset type bar.
Gray background color in the preset type bar displays the current view.
Red indicator on the left side of a preset type in the preset type bar displays, that this value could be stored.
To activate and deactivate values of preset types in the programmer of selected fixtures: Tap the respective preset
type button.
To open the All Preset Pool, tap All at the end of the preset type bar. For more information about preset pools,
refer to Presets Pools View.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
188