MA lighting dot2 User Manual page 211

1. Press + Copy (= Clone)
The console will ask you to choose the clone method.
2. Tap Low Prio Merge .
Figure 3: Fixture 1 and 2 after low prio merge clone
Fixture 2 has now the same values as fixture 1 and the previous defined values (position).
Example Merge
Cue
1
2
3
Let´s assume, you will clone fixture 1 at fixture 2 and add only the previous defined values and not the tracked
values.
1. Press + Copy (= Clone)
The console will ask you to choose the clone method.
2. Tap Merge .
Fixture 1
Cue
(before merge)
Dimmer open (entered
1
value)
Dimmer open (entered
2
value)
Dimmer open (tracked
3
value)
Example Overwrite
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Fixture 1 At 2 Please
Fixture 1
Dimmer open (entered
value)
Dimmer open (entered
value)
Dimmer open (tracked
value)
Fixture 1 At 2 Please
Fixture 2
(before merge)
Dimmer 50 % (entered
value)
Dimmer 50 % (entered
value)
.
Fixture 2
Dimmer 50 % (entered
value)
Dimmer 50 % (entered
value)
.
Fixture 2
(after merge)
Dimmer open
Dimmer open (because
this was an entered
value from fixture 1)
Dimmer 50 %
(because this is a
tracked value and
clone method merge
will not add tracked
values)
211