View Command - MA lighting dot2 User Manual

Control console
Hide thumbs Also See for dot2:
Table of Contents

Advertisement

Group 1 is updated.
Example 2
Let´s assume, you edited preset 1 by using the
Press
Update Please
.
The console asks, if you want to update Preset 1. Tap Ok .
Preset 1 is updated.
Example 3
Let´s assume, you have some values in the programmer and you will update preset 1 to these values.
There are two ways to do this:
a) Press
Update
and tap at preset 1 in the
b) Press
Update Preset 1 Please
Preset 1 is updated with the values in the programmer.
After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.
Example 4
Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.
There are three ways to do this:
a) Press
Update 2
(=Cue 2)
b) Press
Update 2
(=Cue 2) and press executor button 2
c) Press
Update 2
(=Cue 2) and tap at executor 2 in the
If cue 2 on executor 2 is your current active cue, press
Cue 2 of executor 2 is updated with the values in the programmer.
Related Links
Edit Command
Update Key
What is a Programmer?
Presets Pools View

8.68. View Command

© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
edit
command, and now you will apply the changes to preset 1.
preset pools
view.
.
Exec 2 Please
.
.
executor bar
window.
Update
and the executor button 2
.
466

Advertisement

Table of Contents
loading

Table of Contents