8.51. Record Command
This page describes the syntax and how to use the
To use the Record command, type
Description
With the Record command you can,
turn on
turn off
a timecode record for an executor.
Syntax
1. Turn on a timecode record.
Record On
2. Turn off a timecode record.
Record Off
Example
Let´s assume, you will start a timecode record for executor 6.
1. Open the
command line window
Record On Executor 6
2. Press
Please
.
The timecode record starts and the flashing
window.
8.52. Remove Command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Record
command.
Record
in the
command
line.
to use the virtual keyboard and type
record icon
is visible in the
executor bar
and the
executor bar
444