MA lighting dot2 User Manual page 446

Description
With the replace command, you can replace
Presets with Presets
Fixtures with Fixtures
Groups with Groups
for an executor or in the show file.
Syntax
1. Replace a preset if it is used on a executor.
Replace Preset 1 With Preset 2 If Executor 1.2
2. Replace a fixture.
Replace Fixture 1 With Fixture 2
3. Replace a group.
Replace Group 1 With Group 2
Example 1
Let´s assume, you will replace position preset 4 "Singer" with position preset 5 "Piano" if it is used on executor 2.
1. Open the position presets pool.
2. Press + Move
executor button 2
Replace Preset 2.4 With Preset 2.5 If ExecButton 1.2
The console gives you an overview about how many objects will change and asks, to confirm the replace operation.
To apply and leave the window,tap Ok .
To apply and get a detailed report, tap Ok Create Report .
Preset 4 "Singer" is replaced with preset 5 "Piano" if it was used on executor 2.
Example 2
Let´s assume, you will replace fixture 1 with fixture 2 if it is used on executor 1.
Press + Move (=Replace)
Replace Fixture 1 With Fixture 2 If ExecButton 1.1
The console gives you an overview about how many objects will change and asks, to confirm the replace operation.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
(=Replace), tap at preset 4 , press
Please .
Fixture 1 Move (=With)
Move (=With), tap at preset 5 , press
Fixture 2 If , press executor button 1
If and
.
446