MA lighting dot2 User Manual page 115

If you already have a group and you need to name it or rename it, then you can press the
select the group you want to label. This also opens the
1. Press Label
2. Press Group , then you have some options
1. Tap a group in the Groups View
2. Press the numeric keys corresponding to the group number you want and finish with
Call/Use/Select a Group
When you need to use the group all you need to select it.
1. Press Group
2. From here you have two options:
1. Tap the group on the screen - if you have a Group View on one of your screens then you don't need to
press group first.
2. Press the numeric keys corresponding to the group number you want then you can continue. You
could assign a value or make changes to your selection.
If your group have a unique name, then you have another option. You can press the command line and tap "g"
(short for group), space and then the name of the group followed by enter - this might be faster on an external
keyboard.
Copy a Group
You can make a copy of a group. You'll then create a new group that have the exact same selection as the source
group (the way it looks when you did the copy). If you then change the group, the copy will not change.
1. Press Copy
2. Press Group
3. Again you have several options:
1. tap the group (or groups) you want to copy, then tap an empty location.
2. using the keys only needs to be done in a certain order:
1. press the numeric keys corresponding to the group number you want to copy (source)
2. press
3. press the numeric key corresponding with the location for the copy (destination)
4. press
If you select more than one group and then copy to a new location then you will create several copies at the same
time.
Move a Group
To move a group you basically needs to do the same as when you copy it.
1. Press Move
2. Press Group
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
At
Please
Enter Name for window.
Label key and then
Please .
115