MA lighting dot2 User Manual page 272

In this column are all available manufacturer listed.
There are two lines in a cell.
The first line displays the name of the manufacturer.
items
The second line displays all to the manufacturer available modes in the mode column.
Column Device Name
This is the second column in this window.
In this column are all available devices regarding to the selected manufacturer.
There are two lines in a cell.
The first line displays the device name.
items
The second line displays all to the device available modes in the mode column.
Column Mode
This is the third column in this window.
In this column are all available devices regarding to the selected manufacturer and device.
There are three lines in a cell.
The first line displays the mode name.
The second line displays the
Instances
The third line displays the
has.
Information Area
The information area is located at screen 2.
It displays at first, manufacturer, device name and mode in brackets, of the selected fixture type.
Below the name are all DMX channels along with their attributes.
If the fixture type has virtual channels it is displayed below the real channels.
Encoder Bar Functions
Drive:
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
DMX Footprint
, that means how many DMX channels the mode has.
, that means how many different elements with single controls the fixture type
272