MA lighting dot2 User Manual page 319

Select DMX Address... Window
The
existing fixtures
1. For :
column Patch
press and hold in the
new fixtures
2. For :
Add New Fixtures
tap , tap at the last field
Select DMX Address... Window
The
Figure 1: Select DMX Address... Window
In this window, you patch fixtures and select a DMX address.
Below the title bar is the green edit line.
To jump to a DMX address, type the DMX address in the edit line.
The edit line displays also the selected DMX address from the table.
To confirm a selected DMX address, press
previous window.
DMX Address Window
To leave the
Universe Overview
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
is located at the Setup, tap
the cell from the fixture you want patch.
Patch Select
the button.
opens.
in the title bar. The window closes and you are back in the
, press in the title bar. You are back in the previous window.
Patch & Fixture Schedule.
319