MA lighting dot2 User Manual page 353

To leave the Status and Messages window, tap
Status and Messages in Detail
Session Status Master:
The dot2 is the master of a session.
The blue heart is visible after a session is started in the
Session Status Standalone:
The broken red heart is visible if the dot2 is in a standalone mode.
Smiley:
Right beside the command line is the smiley.
The smiley indicates a standalone mode and everything is OK.
Console in a Session:
The dot2 has joined a session.
Network loss:
Network cable or connection is missing or defect. Double-check the network connection.
DMX Tester Output:
DMX tester output is active. To turn the DMX tester off, open the
Timecode Record:
Timecode record is running for a cue list. To turn the timecode record off, open the respective
TC Record in the title bar.
Something is not patched:
There are fixtures in the Patch and Fixture Schedule
Patch and Fixture Schedule.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
in the title bar or press
Network Setup.
tools
without a patch address. Double-check the fixtures in the
Esc on the console.
window.
cues view and tap
353