MA lighting dot2 User Manual page 143

E.g. copying cue 2 to cue 15, 16 and 17 will create three copies of cue 2 located at cue 15, 16 and 17. This is the
key strokes:
Copy Cue 2 at 1 5 Thru 1 7 Please
If you try to copy information to an already existing location you have two options: Overwrite or Merge.
Overwrite will delete the current value. Merge will add new values and overwrite existing values.
Advanced Functionality
If you press and hold the
This is used to make a fixture do exactly what another fixture is doing. If fixture number 1 is used in some groups,
presets and cue list, then it can be a hassle if you need fixture number 5 to do the exact same tings. You would
have to manually check where fixture 1 is used and then re program fixture 5 to do the same. Clone can help you
with this.
When you clone something you are often presented with some options on screen 1.
'Cancel' is used to cancel the clone operation.
'Low Prio Merge' is the default option. It means Low priority merge. It will only clone the values from fixture 1
when there's a values and where fixture 5 doesn't have any values already - it doesn't destroy any already existing
programming for fixture 5.
'Merge' will clone all the values from fixture 1 into fixture 5. If Fixture 5 had something programmed where fixture
1 also had something, than the values will be the same as fixture 1. If Fixture 5 have something programmed that
fixture 1 doesn't , then these values will stay.
'Overwrite' will delete all existing values for fixture 5 and clone the values from fixture 1.
Here's some examples:
In your entire show you need fixture 5 to be a copy of fixture 1 and what fixture 5 had isn't needed anymore:
+ Copy (gives you the Clone command)
In executor 3 you need fixture 5 to be a copy of fixture 1 and what fixture 5 had isn't needed anymore:
+ Copy (gives you the Clone command)
screen 1
In executor 3 you need the fixtures in group 2 to be a copy of fixture 1 and since we are not completely sure if the
fixture in group 2 is used already, then we should do a Low Prio Merge :
+ Copy (gives you the Clone
command) Fixture 1 At Group 2 If Exec 3 Please
There's a very big range of possibilities when cloning. Please also have a look at the
Related link
Copy command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
again you'll need to select copy in the selection box.
key and then press the Copy
Fixture 1 At 5 Please
Fixture 1 At 5 If Exec 3 Please
key, then you'll get the Clone
now select Overwrite on screen 1
now select Low Prio Merge on screen 1
Clone command
command.
now select Overwrite on
description.
143