d o t 2 U s e r Ma n u a l
Tap to enter minutes.
Tap to enter seconds.
Tap to enter frames. The default setting is 30 fps (frames per second). From this follows that 1 frame is equivalent to
0.03 seconds.
Tap to have the same time for Out Fade like In Fade.
Tap to have the same time for Out Delay like In Delay.
Trig Time Calculator Buttons
The following buttons are available in the calculator for trig time, if the cue trigger is set to sound.
With these buttons you choose the used frequency.
All:
Is a mathematical calculation between Snd1, Snd2, Snd3, Snd4, Snd5, Snd6, and Snd7.
Bass:
Is a mathematical calculation between Snd1 and Snd2.
Med:
Is a mathematical calculation between Snd3, Snd4, and Snd5.
High:
Is a mathematical calculation between Snd6 and Snd7.
Snd1:
5 7 Hz
Snd2:
1 15 Hz
206
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com