MA lighting dot2 User Manual page 312

Effects in Presets
A stored effect in a preset is indicated by a purple marker.
Figure 3: Effect stored in a preset
You can store either effects values or normal values in one preset pool object except position presets. In position
preset pool objects, you can store effect values and normal values in one preset pool object.
To edit an effect stored in preset, use the Update function or the Edit function. Refer to
command, and Edit key.
A position preset with an effect can only be end by using the Stomp function or Off function. Refer to
command and Off command. All other effect presets ends by choosing another preset object including only normal
values.
Hint:
You can also store the Stomp function as a preset in the preset pool. For more information, see
work with presets.
Example Dimmer Preset
Figure 4: Dimmer Preset
This is the dimmer preset 1.13 (1 = Dimmer Preset Pool, 13 = Object 13).
The stored dimmer value is displayed in %.
Rightmost of the tile is the orange dimmer bar for a graphical view.
Example Position Preset
Figure 5: Position Preset
This is the position preset 2.1 (2 = Position Preset Pool, 1 = Object 1).
The position preset displays the labeled name.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Update key, Update
Stomp
how to
312