d o t 2 U s e r Ma n u a l
Pressing
Store Time
and then press an empty executor key will give you the following window:
Figure 1: Select Time Master type window.
Here you can select one of the two master types.
The Exec (Executor) Time will overwrite the fade times stored in cues and use the time you set on the fader as a
cross fade between cues. All delay times are ignored.
The Prog (Programmer) Time will be used to fade all your programmer value changes. This includes toggling in and
out of Blind.
You can read more about the different Speed and Time Masters in
Magic Speed
view.
Related links
Time defaults window
Fade command
OutFade command
Delay command
OutDelay command
SnapPercent command
CmdDelay command
6.63. Toggle key
180
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com