MA lighting dot2 User Manual page 455

The cue is stored on the main executor as cue 1.
Example 2
Let´s assume you will store the created cue on an executor button 1.
There are three different ways to do this.
a) Press Store 1 (=Cue 1)
b) Press Store 1 (=Cue 1) and tap on the executor 1 in the
c) Press Store 1 (=Cue 1) and press the respective executor button e.g.
The cue is stored on executor 1.
Example 3
Let´s assume you will store a selection of fixtures as group 1 in the
There are two different ways to do this.
a) Press Store Group 1 Please
b) Press Store and tap on the button of group 1 in the groups view.
The selection of fixtures is stored as group 1 in the groups view.
Example 4
Let´s assume you will store an active dimmer value as dimmer preset 1 in the dimmer
There are two different ways to do this.
a) Press Store Preset 1
b) Press Store and tap on the button of dimmer preset 1 in the dimmer preset pool.
The dimmer value is stored as dimmer preset 1 in the dimmer preset pool.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Exec 1 Please .
.
(= dimmer preset pool) . 1
executor bar view.
on the console.
groups view.
preset
(= preset object 1) Please
pool.
.
455