8.47. Preset Command
This page describes the syntax and how to use the preset command.
To go to the preset command, press
Description
With the preset command, you can e.g.
label a preset
apply presets to fixtures
Syntax
1. Label a preset.
Label Preset 1
2. Apply a preset to a fixture.
Fixture 1 At Preset 1
Example 1
Let´s assume, you will label dimmer preset 1 as "close".
1. Open the
dimmer presets
2. a) Press
Label Preset 1 Please
2. b) Press
Label
and tap on preset 1 in the dimmer preset pool.
The
Enter Name for Window
Example 2
Let´s assume, you will apply color preset 2 (= red) to fixture 1.
There are two ways to do this:
a) Select fixture 1 in the
fixtures
b) Press
Fixture 1 At Preset 4
Preset 2 from the color preset pool is applied at fixture 1.
Related Links
Preset Key
Presets Pools
8.48. PresetType Command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Preset
on the console.
pool.
.
opens.
view, open the
color presets pool
(= color presets pool)
and tap on preset 2 (= red).
. 2
(= preset 2 red)
Please
.
439