MA lighting dot2 User Manual page 294

Network Protocols Configuration Window
Session required:
To use Art-Net or sACN (=streaming ACN), it is necessary to be in a session. To create a session, tap at
Sessions in the Setup. The
If you are not in a session, Art-Net or sACN is not active.
Network protocols and dot2 onPC:
To use Art-Net or sACN with a dot2 onPC, it is necessary to have a Node4 (maximum 1024 DMX
channels) or dot2 console connected.
Windows® 8 or Windows® 8.1:
To use Art-Net on Windows® 8 or Windows® 8.1, it is necessary to start the application as administrator.
If you don´t start the application as administrator, Art-Net is not active.
In this window, you can enable or disable Art-Net or sACN.
Art-Net and sACN are additional network protocols to the default network protocol dot2-Net.
The network protocols transports DMX with wired network connection (Ethernet).
sACN Priority:
The sACN priority in the dot2 is set to 100.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
network setup opens.
294