At Command - MA lighting dot2 User Manual

Example 2
Let´s assume, you will assign a function to an executor.
Press + Label (=Assign)
The function flash is assigned to the respective executor button.
Double check the assigned function in the
Example 3
Let´s assume, you will assign a fade time of 10 to the cue 1 of the executor 5.
Press + Label (=Assign)
The fade time of 10 is assigned to the cue 1 of the executor 5, now.
Double check the assigned fade time in the respective
Example 4
Let´s assume, you will assign the fade time 5 to the current cue of the main executor.
Make sure that the current cue is running.
If the main executor is off, the fade time will be assigned to each cue of the cue list.
Press + Label (=Assign)
The fade time 5 is assigned to the current cue of the main executor.
Related Links
Label Key
Fade Command
Time Key
Patch and Fixture Schedule
Change Functions of Executor Buttons View
Cues View

8.6. At Command

This page describes the syntax and how to use the
To go to the At command, press the
At
is in the command line, now.
At
Description
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Flash and the respective executor button e.g.
Change Functions of Executor Buttons
Time (=Fade) 1 0 Cue 1 Exec 5 Please
Time (=Fade) 5 Please
At
command.
At key on the console.
.
.
Cues View.
.
View.
380