MA lighting dot2 User Manual page 469

Important:
Make sure, that no fixtures are selected. If fixtures are selected, the zero command will be always
execute to all selected fixtures.
Press Fixture 1 Thru 3 . .
The Zero command will be directly executed.
The values of the fixtures 1 thru 3 are zero.
Example 3
Let´s assume you will set the intensity of the fixtures from the executor 1 to zero.
Important:
The physical fader doesn´t move.
Press Exec 1 . . .
The values from the fixtures of the executor 1 are set to zero.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
.
469