MA lighting dot2 User Manual page 481

Error Reason
# 36 Too many numbers There are to many numbers in the command.
# 37 Copy N to M You are trying to copy a larger number of objects to a smaller
elements not supported number of objects.
# 38 Move N to M You are trying to move a larger number of objects to a
elements not supported smaller number of objects.
# 39 Move 1 to M
You are trying to move one object to several destinations.
elements not supported
# 40 Missing Hardware You are trying to access hardware that aren't there.
# 41 Illegal layer The layer you are trying to access is illegal.
# 42 Illegal filename The entered filename is not valid.
# 43 Login needed A login is required.
# 44 Insufficient user
You don't have the sufficient user rights.
rights
# 45 Not a valid clone The source for your clone action isn't valid. There might be a
source mismatch between the source and destination fixture.
# 46 Not a valid clone The destination for your clone action isn't valid. There might
destination be a mismatch between the source and destination fixture.
# 47 Clone source
The console expects a source fixture list.
fixture list expected
# 48 Clone destination
The console expects a destination fixture list.
fixture list expected
# 49 Expected object to
The console expects more fixtures.
be cloned
# 50 Invalid version This function is not supported by this version.
# 51 Illegal time format The entered time format is not valid.
# 52 Operation aborted
You canceled the operation.
by user
# 53 PSR not available You can't Partial Show Read the shows you've selected.
# 54 Variable not found The entered variable is empty or does not exist.
# 56 Preview is only for
The entered object does not support a preview.
cues
# 57 Object does not
The entered object has not an information.
support info command
# 58 Object is locked You tried to access a locked object.
# 59 Illegal destination The object can not be moved to the destination.
# 60 Edit not possible You can not edit the object.
# 61 Move not possible You can not move the object.
# 62 Copy not possible You can not copy the object.
# 64 Command not
The entered command is not valid.
supported
# 65 Insert forbidden You can not insert the object.
# 66 Can not assign You can not assign the object.
# 67 Value too small The entered value is too small.
# 68 Value too big The entered value is too big
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
481