MA lighting dot2 User Manual page 409

Description
With the full command you set the intensity to 100 % of:
The selected fixtures
A selection of fixtures
An executor
Syntax
1. Set the intensity of the selected fixtures to 100 %.
Full
2. Set the intensity of a selection of fixtures to 100 %.
Fixture 1 Thru 3 Full
3. Set the intensity of an executor to 100 %.
Executor 1 Full
Example 1
Let´s assume you will set the intensity of the selected fixtures to 100 %.
Figure 1: Fixture at 0%
Press Full .
The full command will be directly executed.
The values of the selected fixtures are set to 100 % and they are active in the programmer.
Figure 2: Fixtures at full
Hint:
Double-check the executed command in the
Example 2
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
command line view.
409