MA lighting dot2 User Manual page 436

If you want to unpark DMX channels, open the
Syntax
1. Park the the current values of a fixture.
Park Fixture 1
2. Park all attributes of fixture 1 at 100 %.
Park Fixture 1 At 100
3. Park the values of the dimmer preset type of the current fixture selection.
Park PresetType Dimmer
4. Park a specific DMX channel.
Park DMX 1.1
Example 1
Let´s assume you will park the current values of fixture 1.
There are two ways to do this:
a) Press and hold + Pause
b) Press and hold + Pause
Example 2
Let´s assume you will park all attributes of fixture 1 at 100 %.
Press and hold + Pause
All attributes of fixture 1 are parked at 100 %.
Example 3
Let´s assume you will park all dimmer values of the current fixture selection.
There are two ways to do this:
a) Press and hold + Pause
b) Press and hold + Pause
Dimmer
. Tap Enter .
All dimmer values of the current fixture selection are parked.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
tools
(=Park) and tap at fixture 1 in the
(=Park) Fixture 1 Please
(=Park) Fixture 1 At 1 0 0 Please
(=Park) and tap at Dimmer in the
(=Park) + Preset
window.
fixtures view.
.
.
preset type bar.
(=PresetType) and enter in the command line the word
436