Move Command - MA lighting dot2 User Manual

Control console

Hide thumbs Also See for dot2:

Table of Contents

To double-check the sent MIDI Notes, press

For more information, see

1. Send MIDI Note with the selected MIDI channel from the

2. Send MIDI Note with defined MIDI channel and full velocity (127).

MidiNote 1.12

3. Send MIDI Note with the selected MIDI channel from the

MidiNote 12 60

4. Send a MIDINote Off.

MidiNote 14 Off

Let´s assume, you will send a MIDI note on a specific cue to trigger a sound station.

Requirements:

Connected sound station device e.g. computer on the MIDI Out connector.

Stored cue on an executor.

and type in the CMD (= command) column the following syntax:

Figure 1: Cues View with MIDI Notes in the CMD column

The MIDI note will be send if the cue is executed and will trigger the connected sound station.

8.39. Move Command

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

and tap under column MIDI at in the MIDI Monitor .

MIDI Show Control window

and full velocity (127).

and a velocity of 60.