MA lighting dot2 User Manual page 221

7.14. Color Preset Type View
Color Preset Type View
To go to the
- or -
Press and hold and press
The color preset type view is only active if the selected fixture has a color attributes.
The color preset type view has three default tabs: The
Depending on the fixture type additional
Important:
The color picker and the color sliders works absolute. A tap on the color picker or the color slider sets a
new color value and does not follow the already set color values.
The respective encoders works relative to the already set color values.
To open the color effects view
If an effect is running on a selected fixture, the color preset type view change into an effect mode and get a blue
effect mode title bar.
Picker View
The picker view is the first tab of the color preset type view.
Figure 1: Color picker view
In this view, you select the color from the color picker.
You have access to all attributes of the color mix system or the color wheels.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
, tap Color in the Preset Type
4 , for preset type 4 (= Color).
Picker View
Raw Color Views
.
at screen 1, tap at in the title bar.
Bar.
Fader View Swatchbook View.
, the ,
221