Delay Command - MA lighting dot2 User Manual

8.14. Delay Command

This page describes the syntax and how to use the Delay command.
To go to the Delay command it is necessary to press another function key before, e.g.
Time .
Description
With the Delay command you indicate delay times for cues.
Syntax
Create a new cue 1 with a delay time of 3 seconds.
Store Cue 1 Delay 3
Example
Let´s assume, you will store a new cue 1 on the main executor with a delay time of 3 seconds.
Press Store 1 (= Cue 1) three times
Cue 1 is stored on the main executor with a delay time of 3 seconds.
Double check the delay time in the
Related Links
Time Key
Cues View
8.15. Delete Command
This page describes the syntax and how to use the delete command.
To go to the delete command, press
Delete is in the command line, now.
Description
With the delete command, you can
delete cues from a cue list
delete pool objects (e.g. preset type, groups) from the respective pool (e.g. position
unpatch fixtures from the DMX universe
Syntax
1. Delete a cue from a cue list.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Time (= Delay) 3 Please
cues view.
Delete on the console.
Store and then three times
.
preset type pool, groups pool)
394