MA lighting dot2 User Manual page 468

of the current selected fixtures
of a selection of fixtures
from an executor
Syntax
1. Set the intensity from the current selected fixtures to zero.
Zero
2. Set the intensity of a selection of fixtures to zero.
Fixture 1 Thru 3 Zero
3. Set the intensity from an executor to zero.
Executor 1 Zero
Example 1
Let´s assume you will set the intensity of all selected fixtures to zero.
Figure 1: Dimmer at 100 %
Figure 2: Dimmer at 0%
Press . . .
The zero command will be directly executed.
The values of the selected fixtures are zero.
Hint:
Double-check the executed command in the
Example 2
Let´s assume you will set the intensity of the fixtures 1 thru 3 to zero.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
command line view.
468