Error Messages - MA lighting dot2 User Manual

11.3. CrashLogList Command
This page describes the syntax and how to use the
To use the CrashLogList command, type
Description
The CrashLogList command displays in the
To export the crash log file, use the
For more information, refer to
Syntax
CrashLogList
Example
Let´s assume, the console crashes and you will check if a crash log file is provided.
1. Type in the command line:
CrashLogList
2. Press Please .
The command line view displays, if a crash log file is provided.

11.4. Error Messages

If the following error messages does not help to solve the problem, please call or write an e-mail to the dot2
support.
E-Mail: support@ma-dot2.com
Phone: +49 5251 688 865 27
Emergency Phone: +49 5251 688 865 99 (If you are in the middle of a production with problems)
Error
# 0 Unknown error
# 1 Unknown command The entered command is unknown.
# 2 Input too long
# 3 Illegal character
# 4 Command not
implemented
# 5 Number expected
# 6 IP expected
# 7 Number too long
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
CrashLogList
CrashLogList
in the
command line
CrashLogCopy Command.
Error Handling.
Reason
The console have an unknown error.
The entered command is too long.
The entered command is illegal.
The entered command is not supported from the console.
The console expects a number.
The console expects an IP address.
The entered number is too long.
command.
command line.
view, if a crash log file exist.
479