Goback Command - MA lighting dot2 User Manual

8.28. GoBack Command

This page describes the syntax and how to use the GoBack command.
To go to the GoBack command, press the small
Description
With the GoBack command, you go back to the previous cue on a cue list.
Syntax
Go back to the previous cue on a cue list.
GoBack
Example
Let´s assume, the executor 1 is running and you will go back to the previous cue on the cue list stored on executor
1.
There are two ways to do this.
a) Press the small Go - (= GoBack) and the respective executor button
b) Press the small Go - (= GoBack) and tap on the respective executor in the
The previous cue is running.
Related Links
Small Go - Key
Executor Bar View
8.29. Goto Command
This page describes the syntax and how to use the Goto command.
To go to the Goto command, press the
Description
With the Goto command, you go to a specific cue on an executor
directly along with the cue timings
with fade time
Syntax
1. Go to cue 2 on executor 1.
Goto Cue 2 Executor 1
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Go - on the console.
Goto on the console.
.
executor bar view.
413